Product FAQs

My Blend™

What order should I put my ingredients in?

For optimal blending, always be sure to put liquid ingredients in the sport bottle first.

What if my blender stopped working in the middle of blending something?

In the event that the unit loses power, it’s possible that the motor was overheated. In this case, the thermal fuse has activated and turned off the blender in order to cool itself down. Unplug the unit and wait 15 minutes. This should reset the fuse and be able to blend again.

My bottle cap is stuck in the base. How do I get it out?

First unplug the unit. Then re-tighten the bottle into the cap strongly to achieve a good grip. Then try again to remove from the base by turning it counter-clockwise.

Why has my blender blade begun to rust?

It is not common for a blender blade to rust. They are made of stainless steel, but if left in water too long they may rust. To avoid rust, carefully dry the blade assembly immediately after washing.

Why is my blender leaking?

Check the following:
Is the grey sealing ring in the blade assembly?
Is the blade assembly attached tight enough?
Is the jar cracked?
Is the blade assembly cracked?
Is the grey sealing ring cracked, broken or rotting?
Does the item being blended exceed jar capacity?

Why won't my blender turn on?

Check the following:
Is the blender plugged into a working outlet?
Is the jar positioned on the base correctly?
Is the blade assembly tightened all the way?

Is my blender BPA free?

Yes, any piece that touches food is BPA-Free, including the sport bottle, drinking lid, and blade assembly.

Will a sport bottle work with a different color base?

Yes, any color MyBlend™ sport bottle will work with any color MyBlend™ blender base.

Are there recipes available?

Yes, there are recipes available in the instruction book as well as on www.Oster.com.

My blender turns on, but why doesn't the blade rotate?

Make sure the jar is seated properly on the base of the unit.

How do I turn it on?

Once the blade assembly is securely fastened onto the open end of the sport bottle, simply press the sport bottle into the base to initiate blending. Be sure to match up the arrow on the blade assembly to the arrow on the blender base to ensure the pieces are properly aligned.

Can I use my MyBlend™ sport bottle with a regular Oster® blender base?

No, your MyBlend™ sport bottle will only work with the MyBlend™ blender base.

Where can I purchase parts?

Parts can be purchased online.

Why does my Sport Bottle still smell bad after being cleaned?

Depending on the type of ingredients used, an odor may linger within the sport bottle. Next time after cleaning, try storing the blender without the lid or blade assembly attached to the open end.

How do I clean my MyBlend™?

All parts except the blender base are dishwasher safe. You may put the sport bottle, drinking lid, and blade assembly in the dishwasher. To clean the blender base, use a damp soft sponge with a mild detergent to clean the outside.

Is it dishwasher safe?

Yes, all parts except the blender base are dishwasher safe.

Can I put hot ingredients in the sport bottle?

No, it is not advised to put hot ingredients into the sport bottle.